Giỏ hàng của bạn

Số sản phẩm: 0

Thành tiền: 0

Xem giỏ hàng

Sản phẩm mới

Thống kê

Đang online 4
Hôm nay 8
Hôm qua 2
Trong tuần 8
Trong tháng 104
Tổng cộng 1,625

LH110 Nireco - Line follower head LH110

Mô tả: LH110 Nireco - Line follower head LH110
Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Bảo hành: 12 tháng
Xuất xứ: Nireco
Ngày đăng: 28-12-2016

Chi tiết sản phẩm

Kính gửi : Quý Khách hàng!

     Công ty TNHH TM DV Tăng Minh Phát (TMP) chúng tôi là nhà phân phối và thực hiện  các dịch vụ về thiết bị Tự Động Hóa : Cung cấp  tất cả các thiết bị trong ngành tự động hóa công nghiệp của nhiều hãng lớn đến từ các nước như: Đức, Mỹ, Nhật, Ý, Hàn Quốc, Pháp, Ấn Độ,….

Hôm nay, chúng tôi xin giới thiệu tới Quý khách dòng thiết bị hãng Santerno Vietnam:

Nếu Quý khách hàng có nhu cầu về sản phẩm liên hệ:

Mr.Thân: 0911 175 069    _   0984 538 750
Email: sale06@tmpvietnam.com

Skype: vanthanpham

Zalo:    0984 538 750

Web Control Systems
Edge Position Control Systems(Sensors)
LINE FOLLOWER HEAD LH110
Overview |  Feature |  Specifications | 
LH110

 

Overview

The LH110 can be used on slitting machines as the sensor to optically detect register lines or patterns printed on the web. In combination with an amplifier (Liteguide Controller AE1000, AE900L or Webguide Amplifier EH321A), the LH110 can form an EPC (Edge Position Control) and LFC (Line Follower Control) system.

Easy to understand display and functions

process_lh110_2nd.jpg

  • No edge/line changeover required
  • When detecting a wide width line or pattern edge, there is no need to switch between the edge and line.
  • Polarity switching not required
  • When the gradation of the web material and line, (or that of the left and right edges) is reversed, there is no need to switch control output polarity.
  • Gain readjustment not required
  • The change in output voltage for line (edge) deviation is not influenced by line width or color; therefore, once the gain of the controller is set during a trial run, it is not necessary to readjust the gain.
  • Position signal retention function
  • During the interval when a line (edge) leaves the view field to when it returns, the position signal generated immediately before the line (edge) leaves the view field is retained and output. Therefore, a follow-up operation can be performed when the meander speed of a web is fast and the line (edge) tends to be out of the view field.
  • LED indication of optimum attachment position of detector
  • An LED indicator lights when the focal distance is correct and the mounting interval between the path line and detector are appropriate.
  • Line (edge) position indicated by LED
  • Integral action is the standard control operation; however, when used in combination with a position transmitter, the LH110 is capable of proportion action and integral + proportional action. You can choose the best control action for the machine that you are using.
  • An LED indicator lights when the detected edge is at the center of the view field.
  • When the device is connected to a controller that has an actuator lock contact input, (in cases of intermittent lines) the actuator is locked when the break in the line is detected and follow-up operation is stopped until the next line appears. Note: The position signal retention function is not available when an actuator lock signal output is used.


Note: The position signal retention function is not available when an actuator lock signal output is used.

Light emission distance 1mm (from the scattering plate)
2.5 / 5 / 10 mm (switch between these)
Detection view field High luminance LED (2 colors: blue and red)
Light source Output volatage (1) Position signal 0 to +5 V DC (high), 0 to +0.5 V DC (low)
(2) Actuator lock signal Open collector 30 V, 0.1 A or less
ON without line (edge)
Resolution 14 μm
Detector element CCD linear image sensor
Power supply +15V DC, 300mA / -15V DC, 50mA
Ambient operating temperature 0 to +50℃
Body material AC4C
External dimensions (mm) 102 (H) x 58 (W) x 50 (D) (Not including protrusions)
Mass Main unit : 0.6 kg (not including cables), screw guider 0.5kg
Attached cable length 5m

Ngoài ra chúng tôi đang làm đại lý một số thương hiệu lớn như: Mark-10 VietnamAT2E Vietnam , Matsui VietnamRedlions VietnamMasibus VietnamKern-sohn VietnamMatsushima VietnamRotork VietnamSauter VietnamSensorex VietnamSpohn+Burkhardt VietnamValve keystone VietnamVon-rohr VietnamYokogawa VietnamMehrer  VietnamTaiyo VietNamRisen Machinery  VietnamAS Scholer Bolte VietNamPFEUFFER VietnamBircher Reglomat VietNamWisecontrol VietnamBrooks Instruments VietnamNireco VietnamPora VietnamNovotechnik Vietnam, Elettrotek Kabel Vietnam, BIHL Wiedemann Vietnam, Anritsu Vietnam, Vandergraaf VietnamKrebs Riedel VietNamSoldo Vietnam, Burkert Vietnam, MTS Sensors VietnamSick VietnamSiemens VietnamEndress Hauser Vietnam,  Dwyer Vietnam,  Moog VietnamPULS – Power Supply VietnamLeine Linde Vietnam,….